个人简介易红教授、博士生导师，法国雷恩第一大学、澳大利亚莫纳士大学名誉博士，东南大学江苏省微纳生物医疗器械设计与制造重点实验室主任，长期从事先进制造理论及相关技术，微纳生物医疗器械、精准医学检测装置等设计与制造方面的研究。先后主持国家973项目、国家863项目、国家自然科学基金重大科研仪器研制项目、国家自然科学基金重点项目、江苏省自然科学基金重点项目、江苏省科技成果转化项目等近40多项国家级及部省级科研项目。先后获得了国家教学成果奖二等奖1项、江苏省教学改革成果特等奖1项，以及机械部科技进步特等奖、江苏省科技进步一、二等奖等省部级科技进步奖6项。已发表SCI或EI学术论文200余篇。先后入选国家级“新世纪百千万人才工程”、享受国务院“政府特殊津贴”专家、“江苏青年五四奖章”、江苏省“333”科技领军人才、江苏省有突出贡献中青年专家等荣誉。学习经历 1987/3  - 1990/7，清华大学，博士研究生1984/9  - 1987/2，清华大学，硕士研究生1979/9  - 1984/7，清华大学，本科生工作经历2017/12-至今，中南大学，党委书记2015/11-2017/12，东南大学，党委书记2006/05-2015/11，东南大学，党委常委、校长1998/06-2006/05，东南大学，机械工程系主任、副校长、常务副校长1997/03 - 1998/06，东南大学，机械工程系党总支书记（期间：1997年4月被聘为教授）1996/05 - 1997/03，东南大学，机械工程系党总支副书记1990/07 - 1996/05，东南大学，机械工程系教研室副主任、主任（期间：1994年12月被聘为副教授）教授课程计算机集成制造系统（CIMS）、计算机辅助设计与制造（CAD/CAM）、数控机床研究方向微纳医疗器械设计与制造精准医学检测装置设计与制造复杂机电产品数字化设计与制造获奖情况国家百千万人才工程国家级人选 国务院特殊津贴专家江苏省有突出贡献的中青年专家 国家教学成果奖二等奖江苏省教学成果特等奖机械部科技进步特等奖江苏省科学技术进步奖一等奖江苏省科学技术进步奖二等奖代表性论文著作Xiaowen Jiang; Xinlong Zhou; Zonghai Xie; Zhonghua Ni; Rongsheng Lu*; Hong Yi*; An Adjustable TD-NMR Method for Rapid and Quantitative Analysis of Body Composition in Awake Mice, Applied Magnetic Resonance 2020, 51: 241-253. (SCI).Rongsheng Lu*, Pengkun Lei, Qing Yang, Zhonghua Ni, Hong Yi*. Development of a microfluidic NMR device for rapid and quantitative detection of tumour markers. Applied Magnetic Resonance，2019, 50(1-3):357-370. (SCI)Rongsheng Lu*, Jianxiong Hu, Yi Chen, Yuchen Wu, Zhonghua Ni, Hong Yi*.A Low-field Nuclear Magnetic Resonance Spectrometer for Non-invasive Monitoring of Human Finger Blood Glucose fluctuations. Spectroscopy Letters 2018, 2018, 51(7), 395-401. (SCI)Xiang Nan*,Ni Zhonghua, Yi Hong*. Concentration‐controlledparticle focusing in spiral elasto‐inertial microfluidic devices. Electrophoresis, 2018, 39:417-424.(SCI)Hu Jianxiong, Yi Hong, Yin Qifeng, Rongsheng Lu*, Zhonghua Ni*. Design of a multilayer Halbach permanent magnet for human finger NMR detection. International Journal of Applied Electromagnetics and Mechanics, 2017, 54(3):1-13. (SCI)Tang Wenlai, Tang Dezhi, Ni Zhonghua, XiangNan*, Yi Hong*. Microfluidic impedance cytometerwith inertial focusing and liquid electrodes for high-throughput cell countingand discrimination, Analytical Chemistry,2017, 89:3154-3161.(SCI)Tang Wenlai, Tang Dezhi, Ni Zhonghua, Xiang Nan*, Yi Hong*. A portable single-cell analysis systemintegrating hydrodynamic trapping with broadband impedance spectroscopy, Science China Technological Sciences,2017, 60(11):1707-1715.(SCI)Zhang Xinjie, Zhu Zhixian, Ni Zhonghua, Xiang Nan*, Yi Hong*.Inexpensive, rapid fabrication of polymer-film microfluidic autoregulatoryvalve for disposable microfluidics. Biomedical Microdevices,2017, 19(2):21 (SCI)Wu Weiping, Yi Hong, Chen Di, Lu Rongsheng, Yuan Tao,Chen Jingdong, Zhonghua Ni. The design and fabrication of a low-field NMR probebased on a multilayer planar microcoil[J]. Microsyst. Technol., 2014,20(3):419-425. (SCI)Lu Rongsheng, Yi Hong, Wu Weiping, Jiang Yun, Ni Zhonghua. Optimization and experimental test of a miniature permanent magnet structure for a microfluidic magnetic resonance chip. International Journal of Applied Electromagnetics and Mechanics, 2013, 42(4): 479-489.(SCI)Lu Rongsheng, Yi Hong, Wu Weiping, Ni Zhonghua. Development of a miniature permanent magnetic circuit for nuclear magnetic resonance chip. Chinese Journal of Mechanical Engineering, 2013, 26(4): 689-694. (SCI)Wu Weiping; Yi Hong; Chen Di; Lu Rongsheng; Yuan Tao; Chen Jingdong; Ni Zhonghua. The design and fabrication of a low-field NMR probe based on a multilayer planar microcoil. Microsystem Technologies, 2014, 20(3): 419-425. (SCI)Xiang Nan; Yi Hong; Chen Ke; Wang Shanfang; Ni Zhonghua. Investigation of the maskless lithography technique for the  rapid and cost-effective prototyping of microfluidic devices in laboratories. Journal of Micromechanics and Microengineering, 2013, 23(2): 025016. (SCI)Xiang Nan; Yi Hong; Chen Ke; Sun Dongke; Jiang Di; Dai Qing; Ni Zhonghua. High-throughput inertial particle focusing in a curved microchannel: Insights into the flow-rate regulation mechanism and process model. Biomicrofluidics, 2013, 7(4):044116. (SCI)Lu Rongsheng; Yi Hong; Wu Weiping; Jiang Yun; Ni Zhonghua. Optimization and experimental test of a miniature permanent magnet structure for a microfluidic magnetic resonance chip. International Journal of Applied Electromagnetics and Mechanics, 2013, 42(4): 479-489. (SCI)Lu Rongsheng; Yi Hong; Wu Weiping; Ni Zhonghua. Development of a miniature permanent magnetic circuit for nuclear   magnetic resonance chip. Chinese Journal of Mechanical Engineering, 2013, 26(4): 689-694. (SCI)Liu Xiaojun, Yi Hong, Ni Zhonghua*. Application of ant colony optimization algorithm in process planning optimization, Journal of Intelligent Manufacturing ,2013, 24(1): 1-13. (SCI)Liu Xiaojun, Yi Hong, Ni Zhonghua*; Qi Jianchang, QiuXiaoli. Process planning optimization of hole-making operations using ant colony algorithm. International Journal of Advanced Manufacturing Technology, 2013, 69(1-4): 753-769. (SCI)Yi Hong; J Huang. Study on ultrasonic spray technology for the coating of vascular stent. Sci China Technol Sc, 2011, 54(12): 3358-3370. (SCI)Yuan Zhishan; Chen Yunfei; Ni Zhonghua; Wang Yuelin; Yi Hong*. Wafer-level site-controlled growth of silicon nanowires by Cu pattern dewetting. Nano Res, 2015, 8(8): 2646-2653. (SCI) 个人简介易红教授、博士生导师，法国雷恩第一大学、澳大利亚莫纳士大学名誉博士，东南大学江苏省微纳生物医疗器械设计与制造重点实验室主任，长期从事先进制造理论及相关技术，微纳生物医疗器械、精准医学检测装置等设计与制造方面的研究。先后主持国家973项目、国家863项目、国家自然科学基金重大科研仪器研制项目、国家自然科学基金重点项目、江苏省自然科学基金重点项目、江苏省科技成果转化项目等近40多项国家级及部省级科研项目。先后获得了国家教学成果奖二等奖1项、江苏省教学改革成果特等奖1项，以及机械部科技进步特等奖、江苏省科技进步一、二等奖等省部级科技进步奖6项。已发表SCI或EI学术论文200余篇。先后入选国家级“新世纪百千万人才工程”、享受国务院“政府特殊津贴”专家、“江苏青年五四奖章”、江苏省“333”科技领军人才、江苏省有突出贡献中青年专家等荣誉。学习经历1987/3  - 1990/7，清华大学，博士研究生1984/9  - 1987/2，清华大学，硕士研究生1979/9  - 1984/7，清华大学，本科生工作经历 2017/12-至今，中南大学，党委书记2015/11-2017/12，东南大学，党委书记2006/05-2015/11，东南大学，党委常委、校长1998/06-2006/05，东南大学，机械工程系主任、副校长、常务副校长1997/03 - 1998/06，东南大学，机械工程系党总支书记（期间：1997年4月被聘为教授）1996/05 - 1997/03，东南大学，机械工程系党总支副书记1990/07 - 1996/05，东南大学，机械工程系教研室副主任、主任（期间：1994年12月被聘为副教授）教授课程计算机集成制造系统（CIMS）、计算机辅助设计与制造（CAD/CAM）、数控机床研究方向微纳医疗器械设计与制造精准医学检测装置设计与制造复杂机电产品数字化设计与制造获奖情况国家百千万人才工程国家级人选 国务院特殊津贴专家江苏省有突出贡献的中青年专家 国家教学成果奖二等奖江苏省教学成果特等奖机械部科技进步特等奖江苏省科学技术进步奖一等奖江苏省科学技术进步奖二等奖代表性论文著作Xiaowen Jiang; Xinlong Zhou; Zonghai Xie; Zhonghua Ni; Rongsheng Lu*; Hong Yi*; An Adjustable TD-NMR Method for Rapid and Quantitative Analysis of Body Composition in Awake Mice, Applied Magnetic Resonance 2020, 51: 241-253. (SCI).Rongsheng Lu*, Pengkun Lei, Qing Yang, Zhonghua Ni, Hong Yi*. Development of a microfluidic NMR device for rapid and quantitative detection of tumour markers. Applied Magnetic Resonance，2019, 50(1-3):357-370. (SCI)Rongsheng Lu*, Jianxiong Hu, Yi Chen, Yuchen Wu, Zhonghua Ni, Hong Yi*.A Low-field Nuclear Magnetic Resonance Spectrometer for Non-invasive Monitoring of Human Finger Blood Glucose fluctuations. Spectroscopy Letters 2018, 2018, 51(7), 395-401. (SCI)Xiang Nan*,Ni Zhonghua, Yi Hong*. Concentration‐controlledparticle focusing in spiral elasto‐inertial microfluidic devices. Electrophoresis, 2018, 39:417-424.(SCI)Hu Jianxiong, Yi Hong, Yin Qifeng, Rongsheng Lu*, Zhonghua Ni*. Design of a multilayer Halbach permanent magnet for human finger NMR detection. International Journal of Applied Electromagnetics and Mechanics, 2017, 54(3):1-13. (SCI)Tang Wenlai, Tang Dezhi, Ni Zhonghua, XiangNan*, Yi Hong*. Microfluidic impedance cytometerwith inertial focusing and liquid electrodes for high-throughput cell countingand discrimination, Analytical Chemistry,2017, 89:3154-3161.(SCI)Tang Wenlai, Tang Dezhi, Ni Zhonghua, Xiang Nan*, Yi Hong*. A portable single-cell analysis systemintegrating hydrodynamic trapping with broadband impedance spectroscopy, Science China Technological Sciences,2017, 60(11):1707-1715.(SCI)Zhang Xinjie, Zhu Zhixian, Ni Zhonghua, Xiang Nan*, Yi Hong*.Inexpensive, rapid fabrication of polymer-film microfluidic autoregulatoryvalve for disposable microfluidics. Biomedical Microdevices,2017, 19(2):21 (SCI)Wu Weiping, Yi Hong, Chen Di, Lu Rongsheng, Yuan Tao,Chen Jingdong, Zhonghua Ni. The design and fabrication of a low-field NMR probebased on a multilayer planar microcoil[J]. Microsyst. Technol., 2014,20(3):419-425. (SCI)Lu Rongsheng, Yi Hong, Wu Weiping, Jiang Yun, Ni Zhonghua. Optimization and experimental test of a miniature permanent magnet structure for a microfluidic magnetic resonance chip. International Journal of Applied Electromagnetics and Mechanics, 2013, 42(4): 479-489.(SCI)Lu Rongsheng, Yi Hong, Wu Weiping, Ni Zhonghua. Development of a miniature permanent magnetic circuit for nuclear magnetic resonance chip. Chinese Journal of Mechanical Engineering, 2013, 26(4): 689-694. (SCI)Wu Weiping; Yi Hong; Chen Di; Lu Rongsheng; Yuan Tao; Chen Jingdong; Ni Zhonghua. The design and fabrication of a low-field NMR probe based on a multilayer planar microcoil. Microsystem Technologies, 2014, 20(3): 419-425. (SCI)Xiang Nan; Yi Hong; Chen Ke; Wang Shanfang; Ni Zhonghua. Investigation of the maskless lithography technique for the  rapid and cost-effective prototyping of microfluidic devices in laboratories. Journal of Micromechanics and Microengineering, 2013, 23(2): 025016. (SCI)Xiang Nan; Yi Hong; Chen Ke; Sun Dongke; Jiang Di; Dai Qing; Ni Zhonghua. High-throughput inertial particle focusing in a curved microchannel: Insights into the flow-rate regulation mechanism and process model. Biomicrofluidics, 2013, 7(4):044116. (SCI)Lu Rongsheng; Yi Hong; Wu Weiping; Jiang Yun; Ni Zhonghua. Optimization and experimental test of a miniature permanent magnet structure for a microfluidic magnetic resonance chip. International Journal of Applied Electromagnetics and Mechanics, 2013, 42(4): 479-489. (SCI)Lu Rongsheng; Yi Hong; Wu Weiping; Ni Zhonghua. Development of a miniature permanent magnetic circuit for nuclear   magnetic resonance chip. Chinese Journal of Mechanical Engineering, 2013, 26(4): 689-694. (SCI)Liu Xiaojun, Yi Hong, Ni Zhonghua*. Application of ant colony optimization algorithm in process planning optimization, Journal of Intelligent Manufacturing ,2013, 24(1): 1-13. (SCI)Liu Xiaojun, Yi Hong, Ni Zhonghua*; Qi Jianchang, QiuXiaoli. Process planning optimization of hole-making operations using ant colony algorithm. International Journal of Advanced Manufacturing Technology, 2013, 69(1-4): 753-769. (SCI)Yi Hong; J Huang. Study on ultrasonic spray technology for the coating of vascular stent. Sci China Technol Sc, 2011, 54(12): 3358-3370. (SCI)Yuan Zhishan; Chen Yunfei; Ni Zhonghua; Wang Yuelin; Yi Hong*. Wafer-level site-controlled growth of silicon nanowires by Cu pattern dewetting. Nano Res, 2015, 8(8): 2646-2653. (SCI) 个人简介易红教授、博士生导师，法国雷恩第一大学、澳大利亚莫纳士大学名誉博士，东南大学江苏省微纳生物医疗器械设计与制造重点实验室主任，长期从事先进制造理论及相关技术，微纳生物医疗器械、精准医学检测装置等设计与制造方面的研究。先后主持国家973项目、国家863项目、国家自然科学基金重大科研仪器研制项目、国家自然科学基金重点项目、江苏省自然科学基金重点项目、江苏省科技成果转化项目等近40多项国家级及部省级科研项目。先后获得了国家教学成果奖二等奖1项、江苏省教学改革成果特等奖1项，以及机械部科技进步特等奖、江苏省科技进步一、二等奖等省部级科技进步奖6项。已发表SCI或EI学术论文200余篇。先后入选国家级“新世纪百千万人才工程”、享受国务院“政府特殊津贴”专家、“江苏青年五四奖章”、江苏省“333”科技领军人才、江苏省有突出贡献中青年专家等荣誉。学习经历1987/3  - 1990/7，清华大学，博士研究生1984/9  - 1987/2，清华大学，硕士研究生1979/9  - 1984/7，清华大学，本科生工作经历2017/12-至今，中南大学，党委书记2015/11-2017/12，东南大学，党委书记2006/05-2015/11，东南大学，党委常委、校长1998/06-2006/05，东南大学，机械工程系主任、副校长、常务副校长1997/03 - 1998/06，东南大学，机械工程系党总支书记（期间：1997年4月被聘为教授）1996/05 - 1997/03，东南大学，机械工程系党总支副书记1990/07 - 1996/05，东南大学，机械工程系教研室副主任、主任（期间：1994年12月被聘为副教授）教授课程计算机集成制造系统（CIMS）、计算机辅助设计与制造（CAD/CAM）、数控机床研究方向 微纳医疗器械设计与制造精准医学检测装置设计与制造复杂机电产品数字化设计与制造获奖情况国家百千万人才工程国家级人选 国务院特殊津贴专家江苏省有突出贡献的中青年专家 国家教学成果奖二等奖江苏省教学成果特等奖机械部科技进步特等奖江苏省科学技术进步奖一等奖江苏省科学技术进步奖二等奖代表性论文著作Xiaowen Jiang; Xinlong Zhou; Zonghai Xie; Zhonghua Ni; Rongsheng Lu*; Hong Yi*; An Adjustable TD-NMR Method for Rapid and Quantitative Analysis of Body Composition in Awake Mice, Applied Magnetic Resonance 2020, 51: 241-253. (SCI).Rongsheng Lu*, Pengkun Lei, Qing Yang, Zhonghua Ni, Hong Yi*. Development of a microfluidic NMR device for rapid and quantitative detection of tumour markers. Applied Magnetic Resonance，2019, 50(1-3):357-370. (SCI)Rongsheng Lu*, Jianxiong Hu, Yi Chen, Yuchen Wu, Zhonghua Ni, Hong Yi*.A Low-field Nuclear Magnetic Resonance Spectrometer for Non-invasive Monitoring of Human Finger Blood Glucose fluctuations. Spectroscopy Letters 2018, 2018, 51(7), 395-401. (SCI)Xiang Nan*,Ni Zhonghua, Yi Hong*. Concentration‐controlledparticle focusing in spiral elasto‐inertial microfluidic devices. Electrophoresis, 2018, 39:417-424.(SCI)Hu Jianxiong, Yi Hong, Yin Qifeng, Rongsheng Lu*, Zhonghua Ni*. Design of a multilayer Halbach permanent magnet for human finger NMR detection. International Journal of Applied Electromagnetics and Mechanics, 2017, 54(3):1-13. (SCI)Tang Wenlai, Tang Dezhi, Ni Zhonghua, XiangNan*, Yi Hong*. Microfluidic impedance cytometerwith inertial focusing and liquid electrodes for high-throughput cell countingand discrimination, Analytical Chemistry,2017, 89:3154-3161.(SCI)Tang Wenlai, Tang Dezhi, Ni Zhonghua, Xiang Nan*, Yi Hong*. A portable single-cell analysis systemintegrating hydrodynamic trapping with broadband impedance spectroscopy, Science China Technological Sciences,2017, 60(11):1707-1715.(SCI)Zhang Xinjie, Zhu Zhixian, Ni Zhonghua, Xiang Nan*, Yi Hong*.Inexpensive, rapid fabrication of polymer-film microfluidic autoregulatoryvalve for disposable microfluidics. Biomedical Microdevices,2017, 19(2):21 (SCI)Wu Weiping, Yi Hong, Chen Di, Lu Rongsheng, Yuan Tao,Chen Jingdong, Zhonghua Ni. The design and fabrication of a low-field NMR probebased on a multilayer planar microcoil[J]. Microsyst. Technol., 2014,20(3):419-425. (SCI)Lu Rongsheng, Yi Hong, Wu Weiping, Jiang Yun, Ni Zhonghua. Optimization and experimental test of a miniature permanent magnet structure for a microfluidic magnetic resonance chip. International Journal of Applied Electromagnetics and Mechanics, 2013, 42(4): 479-489.(SCI)Lu Rongsheng, Yi Hong, Wu Weiping, Ni Zhonghua. Development of a miniature permanent magnetic circuit for nuclear magnetic resonance chip. Chinese Journal of Mechanical Engineering, 2013, 26(4): 689-694. (SCI)Wu Weiping; Yi Hong; Chen Di; Lu Rongsheng; Yuan Tao; Chen Jingdong; Ni Zhonghua. The design and fabrication of a low-field NMR probe based on a multilayer planar microcoil. Microsystem Technologies, 2014, 20(3): 419-425. (SCI)Xiang Nan; Yi Hong; Chen Ke; Wang Shanfang; Ni Zhonghua. Investigation of the maskless lithography technique for the  rapid and cost-effective prototyping of microfluidic devices in laboratories. Journal of Micromechanics and Microengineering, 2013, 23(2): 025016. (SCI)Xiang Nan; Yi Hong; Chen Ke; Sun Dongke; Jiang Di; Dai Qing; Ni Zhonghua. High-throughput inertial particle focusing in a curved microchannel: Insights into the flow-rate regulation mechanism and process model. Biomicrofluidics, 2013, 7(4):044116. (SCI)Lu Rongsheng; Yi Hong; Wu Weiping; Jiang Yun; Ni Zhonghua. Optimization and experimental test of a miniature permanent magnet structure for a microfluidic magnetic resonance chip. International Journal of Applied Electromagnetics and Mechanics, 2013, 42(4): 479-489. (SCI)Lu Rongsheng; Yi Hong; Wu Weiping; Ni Zhonghua. Development of a miniature permanent magnetic circuit for nuclear   magnetic resonance chip. Chinese Journal of Mechanical Engineering, 2013, 26(4): 689-694. (SCI)Liu Xiaojun, Yi Hong, Ni Zhonghua*. Application of ant colony optimization algorithm in process planning optimization, Journal of Intelligent Manufacturing ,2013, 24(1): 1-13. (SCI)Liu Xiaojun, Yi Hong, Ni Zhonghua*; Qi Jianchang, QiuXiaoli. Process planning optimization of hole-making operations using ant colony algorithm. International Journal of Advanced Manufacturing Technology, 2013, 69(1-4): 753-769. (SCI)Yi Hong; J Huang. Study on ultrasonic spray technology for the coating of vascular stent. Sci China Technol Sc, 2011, 54(12): 3358-3370. (SCI)Yuan Zhishan; Chen Yunfei; Ni Zhonghua; Wang Yuelin; Yi Hong*. Wafer-level site-controlled growth of silicon nanowires by Cu pattern dewetting. Nano Res, 2015, 8(8): 2646-2653. (SCI)